How did you use IJOY CAPO 216 Squonk Mod

Thank you for choosing IJOY! Please read this guide to ensure proper usage. For more information about this product or its use, contact your dealer or visit our local website IJOY www.ijoycig.com

Presentation of products:

CAPO IJOY Squonk mod box 216 is the first and smallest double box Squonk 20700 mod! Long battery life, stylish, personal shot button and battery cover with a practical design customized key controls, large screen and high-power OLED 5-216W customized, simple and safe operation. Suitable for large diameter RDA with USB support for fast charging. Adopting the combination of transparent silicone + ABS special bottle of organic hard and soft Squonk, effectively prevent accidental leakage of compression MOTI Replacement demolition! Users can also make use of an adapter 18650-18650.

Settings

 

1 * 216 IJOY CAPO Squonk BOX MOD

1 * Warranty Card

1 * USB Cable

1 Manual

Damn Vape Base Pro

features
• Screen size: 0.66 “0LED.
• Size: 45 * S * 83.S /1.78*3.29*2.0 1.25 inches.
• Output Power: 5Watts-216watts
• Output Voltage: O.SVolts-8.0Volts.
• Output Current: 1.0A-36A.
• Temperature: 300-600’F / s 150-31 “C.
• Control mode power cables Resistance Range: 0.06ohm-3.0ohm
• Energy efficiency: 95%.

• Methods of Fire: stainless steel metal button drawing.
• Establish a method of feeding: and button down.
• Upgrade Firmware: Yes.
• Output Mode: / IT / VW mode of Ni / SS users and special
• types of cells:
20,700 high-speed cell (discharge current should be greater than 40A) high speed 18,650 cells with the help of battery sleeve (discharge time should be greater than 35A)

Operating instructions:
1. Battery lnstalling

Open the battery cover VOOPOO Drag , insert two 20700 batteries into the battery compartment, please pay attention to the positive and negative electrodes. You can also use the 18650 battery sleeve.

2. On / Off

Press the shutter button 5 times quickly to turn the unit on and off. After ignition, uoy OLED logo and the software version number on standby

(Note:
Please adjust the power in the right range to match that used aerosol before use.
When a new atomizer connected, please press the “+” and – the key to the initial value of the resistance temperature calibration) »»

3. vaping
While the power is on, just keep pressing the shutter button from the vaporizer
(Start time: 10 seconds)
While the power is on, the default display mode VW OLED display.

4. menu

Vandy Vape Coil 

 

Press the shutter button three times within 2 seconds to enter the device menu, and then go to the menu operation, the +/- buttons do not move the shutter button menu for confirmation.

5. How Temp Ni / Ti / SS

1. Temperature control mode information display (labor power, resistance, voltage, operating temperature, and battery power)
2. Press the + and – buttons to increase or decrease the shutter button to confirm, then you can move to adjust the temperature or power.

Innokin Adept Kit - Ecig Vaporizer

6. VWMode

predefined power is 85 W output power can be adjusted from 5W-216W by pressing control +: to increase and decrease Steam Crave Aromamizer Plus  .

7. Mode Settings

In entering this mode, the control screen NORM / hard / soft temperature management mode:

• Normal mode: This is the power you now have before
• Hard Mode: Powerful + 30% before establishing his rule.
• The gentle mode: 20% power setting before power.

ECA setting it?

From the main menu, go to viewing mode “CRT”, press the button to confirm the fire. Press the left / right keys to select the specific parameters.

How to identify new and the same coil WOTOFO Vape 

An interesting and reinstall way to control the temperature of the tank, please press the0-0button to confirm (the same coil) if the coil is used, please press The0 + “to confirm (new coil) if a new coil.

8. Charging via USB?

When the voltage is less than 3.3 V, the display shows “low battery”, then you need to charge your device, connect the device to a computer via a USB cable or AC adapter. You can not vape for chargin.

Read More!

Leave a Reply

Your email address will not be published. Required fields are marked *