Vapeciga vv mods impressed since joining the vaping market and not really make a misstep. Of course, the first product to enter the heads of most people when Dovpo mentioned are the superstructure but were responsible for this very good RDA, RTA, fully regulated and potentiometer devices, and always at a fair price.
Here is his latest RTA were BLOTTO which is a collaboration with Sam Parsons also known as vaping Bogan and I promise I will not say the f *** did during this review. The BLOTTO was designed to detect whether a single or double holes style building Home honeycomb victims of air flow and air cover 242 degrees (do not forget the two additional degrees, lmao very important).
It comes with a glass 2ml currently installed both in line with TPD but placed a drinking glass bubbles and Ultem. There was a lot of hype about this will not affect the way I found BLOTTO can crack!
1 × BLOTTO RTA (pre-installed tubes 2ml)
1 x 6 ml tubes glass bubbles
1 x bubble tubes 6 ml Ultem
1 x Accessory bag
1 x User Manual
1 x opener
The BLOTTO is delivered in a cardboard box with a transparent plastic cover so you can see the RTA before the opening, there are many brands as well as all the usual specifications, etc. in the package. The BLOTTO is available in three different colors, I received from gun metal, but is also available in silver and black. The Council drip and adequate Goon 810 is very enjoyable to watch with a silver metal band around it and the opaque appearance of the silver version Ultem Black and gun metal.
I like the look of BLOTTO, as it has a very distinctive look, both in appearance and basic as bottle caps. the base has a dual air flow that the two lines of numerous small inlet holes (called honeycomb) and vaping Bogan skull visible in the room. The BLOTTO is pre-installed with 2 ml (and other) just glass and go to the bottom of our brand, and safety pins 510. gold overall build quality is good, clean and had a thread.
Blotto specifications and features:
Size: 26.0 (25.5 mm on the same basis) x 54.5mm (with tube 2 ml) / 32.0 × 54.5mm (with 6 ml tube)
Type: 2ml edition PDT; 2 ml Standard Edition
Capacity: 2 ml (6 ml Ultem additional glass tube and the glass tube 6 ml of bubbles included)
Build a platform: support double coil or single coil
242 system airflow °
It is easy to fill in the e-juice.
double diffusion air flow for smooth vacuuming
Color: Gun Metal, Silver, Black
Is different parts and receiving
a tip made of 810 drops look good, but the low profile that does not suit everyone and there is no end or drops 510 adapter is included, of course, you can customize cleaning. then we have a cover plate of the upper bottle cap followed by a section with a port jus and space. This is followed by the base of the floating bridge, we have a standard, gold-plated, pin 510 mounted stand. space screw in the section of the platform and the glass is insured and the top and bottom sealed portion with O-ring. It is advertised as preinstalled regulation 2 ml glass TPD right, but I meet a 3 ml in him no problem. Also receive two bubble 6 ml capacity glass and squonk vape show new. Besides going to the theme in his blottoed receive double skull bottle Bogan door opening as a cutting guide wire coil. Although it comes with 2 parts glass bubble right and overall it was not surprised by what you get.
adapter 510 and coils are not only cotton and 3 rings and screw 4 parts T-piece and it is not different from the choice point dropwise ,. As for me an RTA should be the same as any other tank if the tank gets subohm that comes without the reel will protest and I do not really see the difference. I feel bad that it was a collaboration with the examiner voice tanks heard sacrifice or device sheath that only comes with a single coil / pod and put his name to something that comes with nothing to build, if you can ‘t run, not the conversation speaks!
The BLOTTO used in many others, including several bayonet Zeus RTA RTA to the top as we have seen. I like this method, only a quarter turn and hat. Have a metal plate with two ports kidney shaped charge so large that each bottle will adapt and fill quickly and disorder. A coupling to the upper-cap after filling, again, is only a quarter turn.
air flow inlet is in the base, which is like having a double Cyclops in BLOTTO not accept the open slot, have an airflow honeycomb, 2 line consists of a total of 26 holes on each side. Air flow control ring and the lid when set only poor quality not meeting the RTA as it is very vague and not move very smoothly once.
Air enters through the holes airflow explained and enter the platform bottom, just below where reel / coil will be positioned, have output grid style (slots narrow) and hand we increase curves to match the reel / coil outer contour, ramps have more air outlets of the hive. The airflow is described as “242 ° directly in the air flow coil system” lol I do not know how the scientific process to measure 242 degrees, but let’s say your reel / coil will have a lot of air cover (not be confused with a lot of air).
Looking at the dome and the room was very large flow center section / air road further reduced, so that all the ingredients are there to get a good flavor, simply add your building.
Platform and accumulation
We have a floating platform in dovpo basium squonk click in and although he did not reel postless the main deck is equipped with the same, but only a slight slope down instead of screws also declined slightly tilted. We have two main post section, comprising the structure of the flow path of air which face each other and each part is divided between negative and positive, and the two lead get mounted thereon. The headless screw Flatheads my least favorite because I find the checklist and the will of many favorite hexagonal.
Because the coils are equipped as wire needs of the coil postless bridge to be pre-cut because of this and a real lack of space (when a double set) I really would not say this is a platform suitable for new manufacturers , some commentators say that is built easily, but they forget that used to construct.
Did three construction while using molten Ni80 Claptons shown is a double 3.0ID construction and as seen was a little tight and recommend more than twice the construction of what made using 2.5ID coil. Construction is simple as I coil the 3.5ID use, which worked fine, but next I would try a building with 4.0ID 4.5ID then because in the future I will use as a single coil and BLOTTO RTA I want to find the best construction .
A bottle opener is provided double as guide for cutting the cutting wire carrying the correct length (twice the building), I personally use the directory search to the cutting cylinder included with some of the RTA and RDA and cut a 5 mm led me that I found on the right to build a double if necessary perform a single build its prospects a little more, but you should use based on your reel handle his judgment.
Mecha is easy (I love the floating GTA style platform) that containment out of the process so just put a piece of cotton in the channels and allow absorbed gravity once the swab for the rest of this BLOTTO very lenient on the wick!
My experience using BLOTTO
As mentioned, did build three, two double and single and the first program to me that a single coil construction gives a high yield, so the dovpo 230w get code to build give poor single and double results with a single accumulation two.
I recommend not really be building a dual 3.0ID described as it was too narrow and makes RTA too tight, even for me as a tight tie. I did a double construction with the mixture of 2.5ID Claptons provides the best results for a single building the flavor while providing more BLOTTO of the air, but still very limited compared to most DL RTA. In comparison, usually with the RTA it has good airflow 2/3 open, semi-open or open the third depends on the large tank with BLOTTO but need fully open three constructions.
He stood out for me was the smoothness of BLOTTO but I found an air flow honeycomb do not expect half. As you mentioned in the previous section that all the ingredients are there to get a good taste and even the taste was very good with the three accumulation I do, but enough do not have raptures some people, but they simply could not yet discovered accumulation and become much simpler coil fan experiment I with different 4.0ID and 4.5ID next version is perfect.
I prefer the superior air flow RTA because I hate e-liquid to get my camera, but after some use experienced zero leakage and there is also good bridge flood. I made the third to build a great wrong, I’m a little worried about the 3.0ID double construction because there are plenty of cotton and all I’m doing is the end of the boom so that no comb, use mail-liquid and 80VG it was evil good without a little arrangement. I would prefer to see the glass right and luckily they had a little unpleasant when having being that need to be filled regularly especially for the construction of a double declared for holding 3 ml capacity, but with a hat requires a quarter turn to remove them, it’s a great drama and if you really want a greater capacity -RIGHT while a selection of 6 ml.
I really do not recommend it to someone who is new to build some experience would be beneficial prior to construction in vapeciga topside dual mod but good if you like a challenge, dive right!
Although I do not have quite the wow factor when it comes to taste (but not much) RTA is very good, just hope more comes with it.
Good build quality
See unique cap
Nice to see RTA (subjective)
It works well with either double or single building
Postless style coils adjustment
cover 242 degrees of airflow
Goon mounting beautiful 810 for advanced drip
2 bubbles 6ml including spare parts (1 cup, Ultem 1)
cutting guide bottle opening / coil lead including
Top-cap has a bayonet connection (only a quarter turn to open or secure)
If you like this vaporizer it should be limited up your street
very good taste (although I have not found so extraordinary as many others)
Very smooth flow of air
Very lenient with evacuation
Suffering from zero leakage or flooding
Not suitable for people who like a lot of air (much more limited than most DL RTA)
No coil or cotton plug
Not included adapter 510
Dripless drop advanced AC included
A single backup of the screw and O-ring
Actually, it is not recommended for someone new to the accumulation (narrow space and the need to pre-cut lead)
Does the hexagonal screw favorite
3.0ID limited to two coils to build (and even that is quite narrow 2.5ID much better)
Air flow control ring some specific motion bit
I would like to thank again as the Pearl of the Cigabuy to supply BLOTTO RTA for the purposes of this review.
You can buy here:dovpo box https://www.vapeciga.com/collections/dovpo